In order to make the vibration motor play a greater role, the vibration motor will be installed in different positions to improve the screening efficiency and screening accuracy. The following describes how the vibration motor is generally installed:
1. On Both sides:
This installation method is also the more adopted method for the vibration motor of linear vibrating screen equipment. It is usually used when we have restrictions on the overall height of the device, but there is no restriction on the width of the device.
2. On Top:
This installation method is not common in linear vibrating screens, and few people do this. However, ZSG linear screens usually use this installation method. If customers have restrictions on the height and width of the discharge port of the linear screen equipment, then the vibrating motor Whether it is installed at the bottom or on both sides, the requirements cannot be met. At this time, the vibration motor can be installed in the middle of the top of the equipment, which neither increases the width of the equipment nor affects the reduction of the height of the discharge port of the equipment
3. On Bottom
This is more common, this is the most widely used.
Address: Room 1601, Xinghai Center, the Intersection of Xinzhong Avenue and Renmin East Road, Hongqi District, Xinxiang City, Henan
E-mail: [email protected]