Previously, one customer reported that they bought two linear sieve equipment of the same model, but one of the specific sieve outlets will always be mixed with about 10% of fine powder without sieve.
Xinxiang Dayong Vibration Equipment Co., Ltd. listed the following reasons for customers:
Most of the under-screen mixture is generally caused by broken screens and cracks after the screen frame is worn. It can be solved by simply inspecting the screen and screen frame and replacing them.
There may also be the following reasons:
1. Check the vibration motor to see if it is caused by the insufficient vibration force of the linear screen due to the loose angle of the eccentric block.
2. Check whether the linear screen screen is blocked by the screen mesh, resulting in a decrease in the material throughput rate.
3. the customer use different feeding equipment. Is it because the feeding amount of this linear sieve is too large, which results in the material layer on the screen surface being too thick, and the material on the screen is out of the screen directly before it can contact the causing the mixture on the sieve.
Address: Room 1601, Xinghai Center, the Intersection of Xinzhong Avenue and Renmin East Road, Hongqi District, Xinxiang City, Henan
E-mail: [email protected]