The iron powder contained in the material will not only affect the normal production, but also affect the product quality. So how to solve the problem of iron powder in the material when using the vibrating screen? The following introduces two methods for removing iron powder in materials, so that users who encounter such problems can have a reference:
1. Install a magnet iron remover at the feed port of the vibrating screen
Is there a device that can remove iron and screen at the same time? Actually there is! Iron removal vibrating screen can combine iron removal, screening accuracy and output. This series of vibrating screens is equipped with a strong magnetic rod at the feed port to realize the clearing of the iron powder contained in the material. When the material is put into the vibrating screen by manual or automatic feeding system, it needs to pass through the feed port, and the feed port is equipped with a strong magnetic rod to absorb the iron powder in the material to achieve the effect of iron removal. When the iron powder material is screened, it will perform three-dimensional or linear motion under the action of the vibrating motor to achieve the effect of classification. The advantage of this design is that it can save equipment procurement costs and save labor input. A single device can complete the iron removal and classification work, and it is the current production equipment for removing iron powder in materials;
Two, the model of the vibrating screen of the iron separator
This series of equipment can be divided into round and square according to the shape. The circular iron-removing vibrating screen has high screening accuracy, but due to the large size of the screen surface, the output is about 10 tons. The common model is the linear vibrating screen. When encountering large output requirements, it is necessary to use another square iron separator vibrating screen for production. It should be noted that the iron remover, which is different from the circular vibrating screen, is installed at the feed inlet, and the iron remover of the square vibrating screen is installed on the upper part of the screen frame. In this design, the square vibrating screen is mostly open design, and the output is large. The feature of this equipment is that it is installed on the upper part of the screen frame to adsorb the iron powder in the material. The common model is a linear vibrating screen.
Address: Room 1601, Xinghai Center, the Intersection of Xinzhong Avenue and Renmin East Road, Hongqi District, Xinxiang City, Henan
E-mail: [email protected]