- Contact: 0086-15136770681
- Email: [email protected]
The vertical motor of the direct discharge sifter, which is installed with eccentric hammers on the top and bottom, is regarded as a vibratory source. The eccentric hammers change the track of rotation into horizontal, vertical, and inclined movement, and then pass the movement to the sieving surface. Adjusting the phase angle between the top and bottom eccentric weight can change the trajectories of the materials on the sieve.
1.Simple structure, easy to operate, large processing capacity, long service life, high productivity, low power consumption, easy installation.
2. Processing materials quickly, even materials will not be piled up, rapid screening of materials, obvious effect.
3. Can be directly installed between the raw materials barrel and the storage drums, easy to install, also save space.
4. IP54 protection rank, F level insulation, though work 24 hours a day can greatly extend the vibration motor’s using life; motor still can run in the bad environment.
1.Extensively used for sifting, sorting, and screening a variety of powder, granular, and pellet materials in Flour, Starch, Washing powder, Metal powder, Additive, Chemical, Nonmetal mineral, etc.
2.Be provided with 600mm up to 1800mm. The processing capacity can reach up to 350Kg/150 seconds.
| Model | Inlet diameter (mm) | Mesh Diameter (mesh) | Power | Frequency (r/m) | Amplitude (mm) |
| DYS600 | 300 | 0~100 | 0.37 | 1450 | 3~5 |
| DYS800 | 300 | 0~100 | 0.55 | 1450 | 3~5 |
| DYS1000 | 380 | 0~100 | 0.75 | 1450 | 3~5 |
| DYS1200 | 400 | 0~100 | 1.5 | 1450 | 3~5 |
| DYS1500 | 400 | 0~100 | 2.0 | 1450 | 3~5 |
| DYS1800 | 400 | 0~100 | 2.2 | 1450 | 3~5 |
Note: If you have any inquiries, please email us or leave your message, our engineer will timely contact you.
Address: Room 1601, Xinghai Center, the Intersection of Xinzhong Avenue and Renmin East Road, Hongqi District, Xinxiang City, Henan
Mobile:0086-373-3669005
Fax: 0086-15136770681
E-mail: [email protected]
Tel:0086-373-3669006
